| Remove all | Gridwalk Walkway Fixing Clip Suits: WK4514, WK3022, WK4505 Remove | M01624 Fine Woven Wire Mesh Per Metre: 1.0mm Aperture x 0.56mm Dia Wire Remove | M00416 Fine Woven Wire Mesh Per Metre: 4.75mm Aperture x 1.6mm Dia Wire Remove | Side Angle Left Stanchion, Untreated Or Hot Dip Galvanised, Mild Steel Remove | 32 & 25NB, Short and Long Radius Bends, Mild Steel (Untreated) Remove | Aluminium Pipe 46 O.D, 3.5 x 6500mm Remove | Horizontal Closure Bend (HCB), Aluminium, 46 O.D x 3.5mm Remove | Grating M8 Galvanised, Anti-vibration Locknut Remove | L25440 Perforated Metal Sheet: 25mm Slot, 40% Open Area Remove | M00920 Woven Wire Mesh Per Metre: 2.0mm Apt x 0.9mm Dia Wire, 48% OA Remove | Gripspan 8 x 20mm Joining Bolt Set Remove | Gripspan Filler Plate, Galvanised Remove | Gripspan Galvanised Support Channels Remove | Side Stanchion, Mill Finish, Aluminium Remove | Side Offset Angle Right Stanchion, Untreated Or Hot Dip Galvanised, Mild Steel Remove | Gripspan Accessory JBOLT-M8 Remove | Platform Stanchion, Mill Finish, Aluminium Remove | Gripspan Hold Down Clamp Remove | Gripspan Slotted fixing Clip Remove | Grating Pattern C 25x3 Loadbar, 1003x5800mm Remove | Grating Pattern A 25x3 Loadbar, 993x5800mm Remove | Grating Pattern A 20x5 Loadbar, 995x5800mm Remove | Grating Pattern A 45x5 Loadbar, 995x5800mm Remove | Grating Pattern A 32x5 Loadbar Remove | Grating Pattern A 65x5 Loadbar, 995x5800mm Remove | Grating Pattern C 32x3 Loadbar, 1003x5800mm Remove | Grating Pattern C 32x5 Loadbar, 1005x5800mm Remove | Grating Pattern F 32x5 Loadbar Remove | Grating Pattern D 32x5 Loadbar, 1005x5800mm Remove | Grating Pattern D 25x5 Loadbar, 1005x5800mm Remove |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
| SKU | WK45-CLIP | M01624main | M00416 | SAL_MAIN | 3290main | 4635T6 | H46A | C304MG | L25440main | M00920 | HXB | FP65G | CH24MAIN | SA | SOARMAIN | JBOLT-M8 | PA_MAIN | HDC65 | SLC65-HM | C253_MAIN | A253_MAIN | A205MAIN | A455MAIN | A325_MAIN | A655MAIN | C323_MAIN | C325_MAIN | F325_MAIN | D325Main | D255MPU12 |
| Price | $6.25 ex GST | $90.00 ex GST | Price range: $64.91 through $205.00 ex GST | Price range: $64.65 through $74.45 ex GST | Price range: $10.50 through $10.96 ex GST | $155.00 ex GST | $45.00 ex GST | $1.54 ex GST | $602.18 ex GST | Price range: $50.21 through $130.00 ex GST | Price range: $1.31 through $2.03 ex GST | $98.95 ex GST | Price range: $37.98 through $51.36 ex GST | $129.50 ex GST | Price range: $78.85 through $83.07 ex GST | $2.37 ex GST | Price range: $117.47 through $135.00 ex GST | $14.36 ex GST | $4.97 ex GST | Price range: $336.33 through $503.38 ex GST | Price range: $422.43 through $971.25 ex GST | Price range: $518.71 through $787.30 ex GST | $1,104.53 ex GST | Price range: $799.58 through $1,107.39 ex GST | Price range: $1,480.00 through $2,395.22 ex GST | Price range: $415.50 through $636.72 ex GST | Price range: $623.26 through $964.63 ex GST | Price range: $499.21 through $751.92 ex GST | $547.97 ex GST | |
| Availability | Additional stock available interstate, typically 2 days. | Additional stock available interstate. | Additional stock available interstate, typically 14 days. | 211469 in stock (Additional stock available interstate, typically 14 days.) | 231 in stock (Can be backordered, typically 4 weeks) | Available on backorder, typically 25 -30 working days | 2299 in stock (Additional stock available interstate, typically 14 days.) | Additional stock available interstate, typically 2 days. | 4295 in stock (Additional stock available interstate, typically 14 days.) | Can be backordered, typically 12 weeks, order cannot be processed unless the minimum quantity is met. | ||||||||||||||||||||
| Add to cart | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | ||||||||||
| Description | Galvanised Gridwalk Clipset (WK45-CLIP), This version is compatible with Gridwalk profiles WK30 and WK45 | Aluminium (mill finish) pipe, suitable for use as a top and mid rail with all Monowills welded aluminium stanchions, available in a 6.5m length. | Galvanised filler panel, 3000mm x 75mm to suit 65mm leg. | Side stanchion in aluminium, standard drill. | Slotted Hollymetal Fixing Clip, used to secure (SL) slotted or slotted dimpled (SLD) to steelwork from above with 10-24X65mm Self drilling screw. | Walkway grating with spacings of 40 x 50mm c/c on loadbars and crossrods. Plain surface and in untreated mild steel, sheet is 1005 x 5800mm | ||||||||||||||||||||||||
| Content | A clamping bracket/clip suitable for fixing Gridwalk expanded metal walkway directly to structural steelwork. This version is compatible with Gridwalk beginning WK30 and WK45 For more product help, visit Ideas and Advice | Webforge Locker fine woven wire mesh with 0.56mm stainless steel (304) wire and 1mm openings. Material is cut to the meterage ordered, price is per metre. Max possible single length 30m. | Locker fine woven wire mesh with 1.6mm wire and 4.75mm aperture. Material is available in 1220mm and 1525mm widths, cut to the meterage ordered, price is per metre. Max possible single length 30m. | Side Angle Left stanchion in mild steel, available in an untreated mild steel and hot dip galvanised finish, as well as to a variety of angles, (Stanchions are manufactured with a tolerance of +/- 1 degree, as a result a 42 degree stanchion can be utilised on a 41 or 43 degree incline). | 32NB or 25NB, Short and Long Radius 90 degree bends in mild steel (untreated), Bends can be used in conjunction with Webforge Monowills stanchions. | Aluminium (mill finish) pipe, suitable for use as a top and mid rail with all Monowills welded aluminium stanchions, available in a 6.5m length. | Horizontal closure bend in Aluminium, 46mm outside diameter, 3.5mm pipe wall | Mild Steel grating bolt and nyloc nut, suitable for use with C100MG and C200MG. | Locker L25440 is an attractive perforated metal sheet available in aluminium, with 25mm slots in a staggered pattern (Code E). Slots run parallel to the long side of the sheet. Open areas are noted on individual variations. | Locker fine woven wire mesh with 0.9mm wire and 2mm openings. The material will be cut to the meterage ordered; price is per metre. Max possible single length 30m. | M8 x 20mm Joining bolt set (bolt, nut, washers) to join Gripspan planks together side by side. Use galvanised version (HXBG-8MM) for galvanised planks and zinc plated (HXB-8MM) option for aluminium planks. | Galvanised filler panel, 3000mm x 75mm to suit 65mm leg. | C' Section Walkway Support Channel, Galvanised, 25mm web x 40mm flange x 2.0mm thickness available in various lengths. | Side stanchion in aluminium, standard drill. | Side Offset Angle Right stanchion in mild steel, available in an untreated mild steel and hot dip galvanised finish, as well as to a variety of angles, (Stanchions are manufactured with a tolerance of +/- 1 degree, as a result a 42 degree stanchion can be utilised on a 41 or 43 degree incline). | Zinc plated 'J' Bolt. M8/HM with Washer and Nut, used to fix plank range to supporting members from the underside. Drilling into steelwork required. | Platform stanchion in aluminium. Available in a variety of drilling options to meet the specifications of your job. | Gripspan galvanised hold down clamp. To suit 65mm Gripspan leg. Consists of one screw, anchor device clip and galvanised clamp plate. Used for securing planks to channel section from above. | Slotted Hollymetal Fixing Clip, used to secure (SL) slotted or slotted dimpled (SLD) to steelwork from above with 10-24X65mm Self drilling screw. | Webforge C253 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an untreated or hot dip galvanised finish with a plain or serrated surface. | Webforge A253 is a walkway grating, with spacings of 30 x 100mm c/c on loadbars and crossrods. Available with a plain surface in Aluminium and a plain or serrated surface in Mild steel (untreated) or with a hot dip galvanised finish. | Webforge A205 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. Plain surface and in untreated mild steel or a hot dip galvanised finish. | Webforge A455 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods with a plain surface. Available in mild steel (untreated) or hot dip galvanised. | Webforge A325 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. Available in aluminium or mild steel untreated or hot dip galvanised with a plain or serrated surface and a range of panel widths. | Webforge A655 is a walkway grating with spacings of 30 x 100mm c/c on loadbars and crossrods. Plain surface and in an untreated (mild steel) or hot dip galvanised finish. | Webforge C323 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an untreated or hot dip galvanised finish with a plain or serrated surface. | Webforge C325 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in mild steel, untreated or hot dip galvanised with a plain or serrated surface. | Webforge F325 is a walkway grating with centres of 60 x 50mm on loadbars and crossrods respectively. Available in untreated or hot dip galvanised mild steel with a plain or serrated surface. | Webforge D325 is a walkway grating with spacings of 40 x 50mm c/c on loadbars and crossrods. Available in an untreated mild steel or a hot dip galvanised finish, with a plain surface. | Webforge Locker D255 is a walkway grating with spacings of 40 x 50mm c/c on loadbars and crossrods. Plain surface and in untreated mild steel, sheet is 1005 x 5800mm |
| Weight | 0.26 kg | N/A | N/A | N/A | N/A | 8.40 kg | 1.43 kg | 0.05 kg | N/A | N/A | N/A | 3 kg | N/A | 2.05 kg | N/A | 0.100 kg | N/A | 0.5 kg | 0.10 kg | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | 176.04 kg |
| Dimensions | N/A | N/A | N/A | N/A | N/A | 6500 mm | N/A | N/A | N/A | N/A | N/A | 3000 × 75 × 65 mm | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | 5800 × 1005 × 32 mm | 5800 × 1005 × 25 mm |
| Angle | 29-31 Degree, 32-34 Degree, 35-37 Degree, 38-40 Degree, 41-43 Degree, 44-45 Degree | 90 Degree | 35-37 Degree, 38-40 Degree, 41-43 Degree, 44-45 Degree | |||||||||||||||||||||||||||
| Colour | ||||||||||||||||||||||||||||||
| Drill | STD Drill | STD Drill | STD Drill | Corner Drill, Drilled One Side Only, STD Drill | ||||||||||||||||||||||||||
| Hole Pitch (mm) | 30.16 | |||||||||||||||||||||||||||||
| Hole Shape | Slot | |||||||||||||||||||||||||||||
| Hole Size (mm) | 25.4 x 4.76 | |||||||||||||||||||||||||||||
| Kickplate Orientation & Height | ||||||||||||||||||||||||||||||
| Material | Galvanised Steel | Stainless Steel 304 | Galvanised Steel, Stainless Steel 304, Stainless Steel 316 | Mild Steel | Mild Steel | Aluminium | Aluminium | Mild Steel | Aluminium | Galvanised Steel, Stainless Steel 304 | Aluminium | Mild Steel | Aluminium | Mild Steel | Aluminium, Mild Steel | Mild Steel | Mild Steel | Aluminium, Mild Steel | Mild Steel | Mild Steel | Mild Steel | Mild Steel | Mild Steel | Mild Steel | ||||||
| Material Finish | Hot Dip Galvanised, Untreated (Mill finish) | Untreated (Mill finish) | Hot Dip Galvanised | Galvanised Steel | Galvanised Steel | Hot Dip Galvanised, Untreated (Mill finish) | Hollymetal | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Untreated (Mill finish) | ||||||||||||
| LWO (mm) | ||||||||||||||||||||||||||||||
| SWO (mm) | ||||||||||||||||||||||||||||||
| Wire Diameter (mm) | 0.56 | 1.60 | 0.90 | |||||||||||||||||||||||||||
| Mesh Aperture (mm) | 1.00 | 4.75 | 2.00 | |||||||||||||||||||||||||||
| Material Thickness (mm) | 3.00 | |||||||||||||||||||||||||||||
| Overall height (mm) |
Shopping Cart