Content | Webforge Locker fine woven wire mesh with 0.56mm wire and 1.6mm openings. Available in 304 stainless steel and galvanised steel. Material is cut to the meterage ordered; price is per metre.Max possible single length 30m. | Webforge Locker general purpose perforated metal sheet with 8mm round holes in a staggered pattern. Open area is 47%. Available in a choice of materials and thicknesses | Webforge Locker 1220 is a general purpose expanded metal sheet with mesh openings of approximately 22 x 9mm, with open areas in the range 64-71% (raised) and 62% (flattened). Available in a range of materials. | Splice Plate, To suit 65mm Gripspan leg, available in a galvanised or hot dip galvanised finish. Used to join continuous sections together in runs over clear spans; to enable planks to work as one continuous unit. Alternatively splice plates can be used to join sections over supports. Use HXB-10mm. | Webforge Locker R01623 is a general purpose perforated metal sheet with 1.6mm round holes in a staggered pattern. Open area is 23%. Available in 1.2mm mild steel | Webforge Locker L25440 is an attractive perforated metal sheet available in mild steel and aluminium, with 25mm slots in a staggered or stacked pattern. Slots run parallel to the long side of the sheet. Open areas are noted on individual variations. | Self drilling screw. Use with the Gripspan ADC diamond washer when fixing plain (PL) or serrated (SR) Gripspan sheets onto steelwork. |
Material | Galvanised Steel, Stainless Steel 304 | Galvanised Steel, Mild Steel | Aluminium, Aluminium (flattened), Galvanised Steel, Mild Steel, Mild Steel (flattened) | | Mild Steel | Aluminium, Mild Steel | Zinc plated |