| M01222 Fine Woven Wire Mesh Per Metre: 1.4mm Openings Remove | M00314 Fine Woven Wire Mesh Per Metre: 6.4mm Openings Remove | Horizontal Closure Bend (HCB) 32NB, Untreated or Galvanised Steel Remove | Grating Pattern C 25x5 Loadbar, 1005x5800mm Remove | M00920 Fine Woven Wire Mesh Per Metre: 2.0mm Openings Remove | R09551 Perforated Metal Sheet: 9.5mm Round, 51% Open Area Remove | Gripspan End/Carrier Plates Remove | R03341 Perforated Metal Sheet: 3.25mm Round, 41% Open Area Remove | FRP 38x6mm Grit Grey Surface 19x19mm square, 1220x3660mm Remove | M01224 Fine Woven Wire Mesh Per Metre: 1.6mm Openings Remove | Side Stanchion, Untreated Or Hot Dip Galvanised, Mild Steel Remove | Gripspan Hold Down Clamp Remove | S11149 Perforated Metal Sheet: 11mm Square, 49% Open Area Remove | Pipe 32NB Mild Steel 3.2 x 6500mm Remove | M00214 Fine Woven Wire Mesh Per Metre: 10mm Openings Remove | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Image |  |  |  |  |  |  |  |  |  |  |  |  |  |  |  |
| SKU | M01222 | M00314 | H32_MAIN | C255_MAIN | M00920 | R09551 | CPL65GMAIN | R03341MS20 | G38619IGD1 | M01224 | S_MAIN | HDC65 | S11149 | 32MAIN | M00214 |
| Price | $119.41 – $181.66 ex GST | $102.22 – $281.34 ex GST | $20.80 – $22.83 ex GST | $487.30 – $757.90 ex GST | $56.06 – $163.35 ex GST | $219.56 – $497.00 ex GST | $14.52 – $33.02 ex GST | $355.40 ex GST | $733.94 ex GST | $41.34 – $90.81 ex GST | $48.72 – $69.03 ex GST | $14.36 ex GST | $237.45 ex GST | $76.82 – $77.69 ex GST | $65.97 – $116.28 ex GST |
| Availability | 69 in stock (can be backordered) | 15 in stock (can be backordered) | 2185 in stock (can be backordered) | ||||||||||||
| Add to cart | |||||||||||||||
| Description | 2mm Mild Steel (Untreated), Sheet Size 2440 x 1220mm | Isopthalic Polyester Resin, (FRP) with 38 x 6mm loadbars, complete with an overlay that results 12 x 12mm surface apertures. The sheet is rendered anti-skid by coarse grit that is embedded into the top surface, sheets are available in grey. | |||||||||||||
| Content | Webforge Locker fine woven wire mesh with 0.7mm stainless steel (304 & 316) wire and 1.4mm openings. Material is cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker fine woven wire mesh with 2mm wire and 6.4mm square openings. Mesh is available in a variety of widths and materials, it will be cut to the meterage ordered, price is per metre.Max possible single length 30m. | Horizontal closure bend in mild steel material, available in mild steel (untreated) or galvanised steel. | Webforge Locker C255 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an untreated or hot dip galvanised finish with a plain or serrated surface. | Webforge Locker fine woven wire mesh with 0.9mm wire and 2mm openings. Due to current stock levels only available in Stainless Steel, material will be cut to the meterage ordered, price is per metre. Max possible single length 30m. | Webforge Locker R09551 is a general purpose, perforated metal sheet with 9.5mm round holes in a staggered pattern. Open area is 51%. Available in a choice of materials and thicknesses | Galvanised End/Carrier plates, are available in 225 & 300mm. These can be used to bolt planks end to end by welding onto the ends of planks and bolting with M10 x 20mm bolts, or as part of fabricated stair tread assemblies. | Webforge Locker R03341 is a general purpose perforated metal sheet, in mild steel with 3.25mm round holes in a staggered pattern. Open area is 41%. | Fibre Reinforced plastic grating sheet in Isopthalic Polyester Resin, with 38 x 6mm loadbars, complete with an overlay that results 12 x 12mm surface apertures. The sheet is rendered anti-skid by coarse grit that is embedded into the top surface, sheets are available in grey. | Webforge Locker fine woven wire mesh with 0.56mm wire and 1.6mm openings. Available in 304 stainless steel and galvanised steel. Material is cut to the meterage ordered; price is per metre.Max possible single length 30m. | Side stanchion in mild steel, available in an untreated and hot dip galvanised finish. As well as a range of different drill options and single slot kickplate brackets at differing heights and orientations to suit the specifications of your job. | Gripspan galvanised hold down clamp. To suit 65mm Gripspan leg. Consists of one screw, anchor device clip and galvanised clamp plate. Used for securing planks to channel section from above. | General purpose perforated sheet with 11mm square holes in straight rows. Available in mild steel. Open area is 49%. | Mild steel pipe, in galvanised or untreated, suitable for use as a hand/top rail with all Monowill welded stanchions or as the hand and knee rail when combined with the 32NB Monowills Link, modular handrail series, available in a 6.5m length. | Webforge Locker fine woven wire mesh with 2mm wire and 10mm openings. Available in a 1220mm wide rolls of either galvanised steel or 304 stainless steel wire. Mesh is cut to the meterage ordered, price is per metre.Max possible single length 30m. |
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | N/A | 27.6 kg | 85 kg | N/A | N/A | 0.5 kg | N/A | N/A | N/A |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | N/A | 2440 × 1220 × 2.0 mm | 3660 × 1220 × 38 mm | N/A | N/A | N/A | N/A | N/A | N/A |
| Angle | |||||||||||||||
| Colour | Grey | ||||||||||||||
| Drill | Drilled Left Side Only, Drilled Right Side only, STD Drill | ||||||||||||||
| Hole Pitch (mm) | 12.70 | 4.78 | 15.88S | ||||||||||||
| Hole Shape | Round | Round | Square | Square | |||||||||||
| Hole Size (mm) | 9.50 | 3.25 | 11.11S | ||||||||||||
| Kickplate Orientation & Height | No Kickplate Bracket, R160 | ||||||||||||||
| Material | Stainless Steel 304, Stainless Steel 316 | Galvanised Steel, Stainless Steel 304 | Mild Steel | Mild Steel | Galvanised Steel, Stainless Steel 304 | Aluminium, Galvanised Steel, Mild Steel | Mild Steel | FRP | Galvanised Steel, Stainless Steel 304 | Mild Steel | Mild Steel | Mild Steel | Galvanised Steel, Stainless Steel 304 | ||
| Material Finish | Galvanised Steel, Untreated (Mill finish) | Hot Dip Galvanised, Untreated (Mill finish) | Galvanised Steel | Grit | Hot Dip Galvanised, Untreated (Mill finish) | Galvanised Steel, Untreated (Mill finish) | |||||||||
| LWO (mm) | |||||||||||||||
| SWO (mm) | |||||||||||||||
| Wire Diameter (mm) | 0.70 | 2.00 | 0.90 | 0.56 | 2.00 | ||||||||||
| Mesh Aperture (mm) | 1.40 | 6.40 | 2.00 | 1.60 | 10.00 | ||||||||||
| Material Thickness (mm) | 1.00, 1.60, 3.00 | 2.00 | 1.60 | ||||||||||||
| Overall height (mm) | 38 |
Shopping Cart