Content | Webforge Locker 1520 is a general purpose expanded metal sheet with mesh openings of approximately 29 x 12mm and a total open area in the range 68-74% (raised) & 60% (flattened). Available in a range of materials. | Webforge Locker R07962 is a general purpose, perforated metal sheet with 7.9mm round holes in a staggered pattern. Open area is 62%. Available in a choice of materials and thicknesses | Webforge Locker R01636 is a general purpose perforated metal sheet with 1.6mm round holes in a staggered pattern. Open area is 36%. | Webforge Locker woven wire mesh with 1.6mm stainless steel (304) or galvanised steel wire and 7.1mm openings. Roll is 1220mm wide and cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker R09551 is a general purpose, perforated metal sheet with 9.5mm round holes in a staggered pattern. Open area is 51%. Available in a choice of materials and thicknesses | Webforge Locker R01623 is a general purpose perforated metal sheet with 1.6mm round holes in a staggered pattern. Open area is 23%. Available in 1.2mm mild steel | Webforge Locker R02440 is a general-purpose perforated metal sheet with 2.4mm round holes in a staggered pattern. The open area is 40%. Available in a choice of materials | Webforge Locker D255 is a walkway grating with spacings of 40 x 50mm c/c on loadbars and crossrods. Plain surface and in untreated mild steel, sheet is 1005 x 5800mm | Webforge Locker 1930 is a general purpose expanded metal sheet with mesh openings of approximately 37 x 16mm and a total open area in the range 66-74% (raised) and 66% (flattened)
Available in a variety of materials & profiles. | Webforge Locker C253 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an untreated or hot dip galvanised finish with a plain or serrated surface. | Webforge Locker general purpose perforated aluminium sheet with 8mm square holes in straight rows. Open area is 53%. | Webforge Locker 0910A is a general purpose expanded Aluminium sheet with mesh openings of approximately 22 x 7mm and a total open area in the range 75-89%. | Horizontal closure bend in Aluminium, 46mm outside diameter, 3.5mm pipe wall |
Material | Hot Dip Galvanised, Mild Steel, Mild Steel (flattened) | Galvanised Steel, Mild Steel | Mild Steel, Stainless Steel 304 | Galvanised Steel, Stainless Steel 304 | Aluminium, Galvanised Steel, Mild Steel | Mild Steel | Aluminium, Galvanised Steel, Mild Steel, Stainless Steel 316 | Mild Steel | Aluminium, Aluminium (flattened), Galvanised Steel, Mild Steel, Mild Steel (flattened) | Mild Steel | Aluminium | Aluminium | Aluminium |