Content | Fibre Reinforced plastic sheets with 25 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | General purpose perforated sheet with 11mm square holes in straight rows. Available in mild steel. Open area is 49%. | Webforge Locker fine woven wire mesh with 0.7mm stainless steel (304 & 316) wire and 1.4mm openings. Material is cut to the meterage ordered, price is per metre.Max possible single length 30m. | Side stanchion in aluminium, standard drill. | Webforge Locker R07962 is a general purpose, perforated metal sheet with 7.9mm round holes in a staggered pattern. Open area is 62%. Available in a choice of materials and thicknesses | Webforge Locker R09551 is a general purpose, perforated metal sheet with 9.5mm round holes in a staggered pattern. Open area is 51%. Available in a choice of materials and thicknesses | Webforge Locker fine woven wire mesh with 0.56mm stainless steel (304) wire and 1mm openings. Material is cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker 0910A is a general purpose expanded Aluminium sheet with mesh openings of approximately 22 x 7mm and a total open area in the range 75-89%. | Webforge Locker R01623 is a general purpose perforated metal sheet with 1.6mm round holes in a staggered pattern. Open area is 23%. Available in 1.2mm mild steel | Webforge Locker 1930 is a general purpose expanded metal sheet with mesh openings of approximately 37 x 16mm and a total open area in the range 66-74% (raised) and 66% (flattened)
Available in a variety of materials & profiles. | Webforge Locker fine woven wire mesh with 0.9mm wire and 2mm openings. Due to current stock levels only available in Stainless Steel, material will be cut to the meterage ordered, price is per metre.
Max possible single length 30m. | Webforge Locker C505 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Plain surface and in untreated (mild steel) or hot dip galvanised finish. |
Material | FRP | Mild Steel | Stainless Steel 304, Stainless Steel 316 | Aluminium | Galvanised Steel, Mild Steel | Aluminium, Galvanised Steel, Mild Steel | Stainless Steel 304 | Aluminium | Mild Steel | Aluminium, Aluminium (flattened), Galvanised Steel, Mild Steel, Mild Steel (flattened) | Galvanised Steel, Stainless Steel 304 | Mild Steel |