| Inground Velocity Stanchion, Monowills Link Modular Railing Remove | Platform Velocity Stanchion, Monowills Link Modular Railing Remove | WK3419 Gridwalk Walkway Mesh: 84 x 23mm Openings Remove | Grating M8 Mild Steel Galvanised, Thread Rolling Screw Remove | |
|---|---|---|---|---|
| Image |  |  |  |  |
| SKU | ML-IG-VEL-MAIN | ML-PW-VEL | WK3419main | C302MG |
| Price | Price range: $117.74 through $140.07 ex GST | Price range: $119.77 through $143.12 ex GST | Price range: $392.70 through $526.90 ex GST | $1.24 ex GST |
| Availability | Available on back-order | Available on back-order | Additional stock available interstate, typically 14 days. | |
| Add to cart | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | View Options This product has multiple variants. The options may be chosen on the product page | |
| Description | Mild Steel galvanised Hex head, thread rolling screw, suitable for use with C100MG (50 x 8mm), Pilot hole of 7.4mm required | |||
| Content | Monowills LINK, Inground Velocity stanchion fully assembled in galvanised steel. Stanchions can be supplied with fittings to suit either 32 or a 40 nominal bore horizontal rails. and as a two, three rail or a balustrade stanchion, in a galvanised finish. | Monowills LINK, Platform Velocity stanchion fully assembled in galvanised steel. Stanchions can be supplied with fittings to suit either 32 or a 40 nominal bore horizontal rails, and as a two, three rail or a balustrade stanchion, in a galvanised finish. | Webforge Locker Gridwalk, WK3419 is an expanded metal walkway with mesh openings of 84 x 23mm. Sold as a 1200 x 3000mm sheet in an untreated mild steel or hot dip galvanised finish. For more product help, visit Ideas and Advice | Mild Steel galvanised Hex head, thread rolling screw, suitable for use with C100MG (50 x 8mm), Pilot hole of 7.4mm required Installation Guide: 1. Place the grating in position. 2. Fit the C100MG clip to the grating and use it as a guide to pre-drill a 7.4mm pilot hole into the support structure. 3. Fit the screw C302MG into the top clip C100MG. 4. From the top of the grating using a hex head drive, drive the thread rolling screw into the pilot hole with a torque setting of 30Nm until it seats the top clip firmly against the grating and support steel. |
| Weight | N/A | N/A | N/A | 0.05 kg |
| Dimensions | N/A | N/A | N/A | N/A |
| Angle | ||||
| Colour | ||||
| Drill | STD Drill | STD Drill | ||
| Hole Pitch (mm) | ||||
| Hole Shape | ||||
| Hole Size (mm) | ||||
| Kickplate Orientation & Height | ||||
| Material | Galvanised Steel | Galvanised Steel | Mild Steel | |
| Material Finish | Hot Dip Galvanised | |||
| LWO (mm) | 84 | |||
| SWO (mm) | 23 | |||
| Wire Diameter (mm) | ||||
| Mesh Aperture (mm) | ||||
| Material Thickness (mm) | 5.00 | |||
| Overall height (mm) | 16 |
Shopping Cart