Content | Platform angle stanchions in mild steel, available in an untreated or hot dip galvanised finish, as well as a range of angles to suit the specifications of your job (Stanchions are manufactured with a tolerance of +/- 1 degree, as a result for instance a 36 degree stanchion can be utilised on a 36,35 or 37 degree incline). | Webforge Locker 1930 is a general purpose expanded metal sheet with mesh openings of approximately 37 x 16mm and a total open area in the range 66-74% (raised) and 66% (flattened)
Available in a variety of materials & profiles. | Webforge Locker fine woven wire mesh with 0.56mm stainless steel (304) wire and 1mm openings. Material is cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker L25440 is an attractive perforated metal sheet available in mild steel and aluminium, with 25mm slots in a staggered or stacked pattern. Slots run parallel to the long side of the sheet. Open areas are noted on individual variations. | High Tensile woven wire from Webforge Locker. Made from 4.0mm high tensile steel with 10mm aperture. Available in flat sheets only. | Webforge Locker general purpose perforated aluminium sheet with 8mm square holes in straight rows. Open area is 53%. | Fibre Reinforced plastic sheets with 25 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Webforge Locker 0916 is a general-purpose expanded metal sheet with mesh openings of approximately 19 x 5mm and a total open area in the range 48-56% (raised) and 53% (flattened). Available in a variety of materials | Webforge Locker R12749 is a general purpose, perforated metal sheet with 12.7mm round holes in a staggered pattern. Open area is 49%. Available in a choice of materials and thicknesses | Fibre Reinforced plastic sheets with 38 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. |
Material | Mild Steel | Aluminium, Aluminium (flattened), Galvanised Steel, Mild Steel, Mild Steel (flattened) | Stainless Steel 304 | Aluminium, Mild Steel | High Tensile Steel | Aluminium | FRP | Hot Dip Galvanised, Mild Steel, Mild Steel (flattened) | Galvanised Steel, Mild Steel, Stainless Steel 304 | FRP |