| Grating M8 Mild Steel Galvanised, Thread Rolling Screw Remove | |||
|---|---|---|---|
| Image |  | ||
| SKU | C302MG | ||
| Price | $1.24 ex GST | ||
| Availability | Additional stock available interstate, typically 14 days. | ||
| Add to cart | |||
| Description | Mild Steel galvanised Hex head, thread rolling screw, suitable for use with C100MG (50 x 8mm), Pilot hole of 7.4mm required | ||
| Content | Mild Steel galvanised Hex head, thread rolling screw, suitable for use with C100MG (50 x 8mm), Pilot hole of 7.4mm required Installation Guide: 1. Place the grating in position. 2. Fit the C100MG clip to the grating and use it as a guide to pre-drill a 7.4mm pilot hole into the support structure. 3. Fit the screw C302MG into the top clip C100MG. 4. From the top of the grating using a hex head drive, drive the thread rolling screw into the pilot hole with a torque setting of 30Nm until it seats the top clip firmly against the grating and support steel. | ||
| Weight | 0.05 kg | ||
| Dimensions | N/A | ||
| Angle | |||
| Colour | |||
| Drill | |||
| Hole Pitch (mm) | |||
| Hole Shape | |||
| Hole Size (mm) | |||
| Kickplate Orientation & Height | |||
| Material | Mild Steel | ||
| Material Finish | Hot Dip Galvanised | ||
| LWO (mm) | |||
| SWO (mm) | |||
| Wire Diameter (mm) | |||
| Mesh Aperture (mm) | |||
| Material Thickness (mm) | |||
| Overall height (mm) |
Shopping Cart