| Remove all | Grating M8 Mild Steel Galvanised, Thread Rolling Screw Remove | 1920 Expanded Metal Sheet: 40 x 18mm Openings Remove | |
|---|---|---|---|
| Image |  |  | |
| SKU | C302MG | 1920main | |
| Price | $1.24 ex GST | Price range: $94.97 through $135.69 ex GST | |
| Availability | Additional stock available interstate, typically 14 days. | ||
| Add to cart | View Options This product has multiple variants. The options may be chosen on the product page | ||
| Description | Mild Steel galvanised Hex head, thread rolling screw, suitable for use with C100MG (50 x 8mm), Pilot hole of 7.4mm required | ||
| Content | Mild Steel galvanised Hex head, thread rolling screw, suitable for use with C100MG (50 x 8mm), Pilot hole of 7.4mm required Installation Guide: 1. Place the grating in position. 2. Fit the C100MG clip to the grating and use it as a guide to pre-drill a 7.4mm pilot hole into the support structure. 3. Fit the screw C302MG into the top clip C100MG. 4. From the top of the grating using a hex head drive, drive the thread rolling screw into the pilot hole with a torque setting of 30Nm until it seats the top clip firmly against the grating and support steel. | Webforge Locker 1920 is a general purpose expanded metal sheet with mesh openings of approximately 40 x 18mm and a total open area in the range 77-81% (raised) and 74% (flattened). Available in a range of materials. | |
| Weight | 0.05 kg | N/A | |
| Dimensions | N/A | N/A | |
| Angle | |||
| Colour | |||
| Drill | |||
| Hole Pitch (mm) | |||
| Hole Shape | |||
| Hole Size (mm) | |||
| Kickplate Orientation & Height | |||
| Material | Mild Steel | Hot Dip Galvanised, Mild Steel, Mild Steel (flattened) | |
| Material Finish | Hot Dip Galvanised | ||
| LWO (mm) | 40 | ||
| SWO (mm) | 18 | ||
| Wire Diameter (mm) | |||
| Mesh Aperture (mm) | |||
| Material Thickness (mm) | 2.00 | ||
| Overall height (mm) |
Shopping Cart