Content | General purpose perforated sheet with 11mm square holes in straight rows. Available in mild steel. Open area is 49%. | Webforge Locker C255 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an untreated or hot dip galvanised finish with a plain or serrated surface. | Webforge Locker F325 is a walkway grating with centres of 60 x 50mm on loadbars and crossrods respectively. Available in untreated or hot dip galvanised mild steel with a plain or serrated surface. | Webforge Locker R09551 is a general purpose, perforated metal sheet with 9.5mm round holes in a staggered pattern. Open area is 51%. Available in a choice of materials and thicknesses | Webforge Locker 1516 is a general purpose expanded metal sheet with mesh openings of approximately 30 x 13mm and a total open area in the range 68-78% (raised) and 65% (flattened). Available in a choice of materials | Fibre Reinforced plastic sheets with 38 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Webforge Locker 1930 is a general purpose expanded metal sheet with mesh openings of approximately 37 x 16mm and a total open area in the range 66-74% (raised) and 66% (flattened)
Available in a variety of materials & profiles. | Webforge Locker fine woven wire mesh with 1.6mm wire and 5mm openings. Material is available in 1220mm and 1525mm widths, cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker R06451 is a general purpose, perforated metal sheet with 6.4mm round holes in a staggered pattern. Open area is 51%. Available in a choice of materials | Webforge Locker R04851 is a general purpose, perforated metal sheet with 4.8mm round holes in a staggered pattern. Open area is 51%. Available in a choice of materials and thicknesses | Webforge Locker R07962 is a general purpose, perforated metal sheet with 7.9mm round holes in a staggered pattern. Open area is 62%. Available in a choice of materials and thicknesses | Webforge Locker fine woven wire mesh with 0.9mm stainless steel (304) wire and 3.15mm openings. Material is 1550mm wide and cut to the meterage ordered, price is per metre.Max possible single length 30m. | Side Offset Angle Left stanchion in mild steel, available in an untreated mild steel and hot dip galvanised finish, as well as to a variety of angles, (Stanchions are manufactured with a tolerance of +/- 1 degree, as a result a 42 degree stanchion can be utilised on a 41 or 43 degree incline). | Webforge Locker L25440 is an attractive perforated metal sheet available in mild steel and aluminium, with 25mm slots in a staggered or stacked pattern. Slots run parallel to the long side of the sheet. Open areas are noted on individual variations. | Webforge Locker 1216 is a general purpose expanded metal sheet with mesh openings of approximately 23 x 9mm and a total open area in the range 67-75% (raised) and 63% (flattened). Available in a choice of materials. |
Material | Mild Steel | Mild Steel | Mild Steel | Aluminium, Galvanised Steel, Mild Steel | Aluminium, Galvanised Steel, Galvanised Steel (Flattened), Mild Steel, Mild Steel (flattened) | FRP | Aluminium, Aluminium (flattened), Galvanised Steel, Mild Steel, Mild Steel (flattened) | Galvanised Steel, Stainless Steel 304, Stainless Steel 316 | Aluminium, Galvanised Steel, Mild Steel, Stainless Steel 304 | Aluminium, Galvanised Steel, Mild Steel, Stainless Steel 304, Stainless Steel 316, Zinc Alume | Galvanised Steel, Mild Steel | Stainless Steel 304 | Mild Steel | Aluminium, Mild Steel | Aluminium (flattened), Galvanised Steel, Galvanised Steel (Flattened), Mild Steel, Mild Steel (flattened) |