Content | Webforge Locker fine woven wire mesh with 1.6mm wire and 5mm openings. Material is available in 1220mm and 1525mm widths, cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker 1930 is a general purpose expanded metal sheet with mesh openings of approximately 37 x 16mm and a total open area in the range 66-74% (raised) and 66% (flattened)
Available in a variety of materials & profiles. | Webforge Locker general purpose perforated aluminium sheet with 8mm square holes in straight rows. Open area is 53%. | Webforge Locker F10236 is an attractive perforated metal sheet in a club and round pattern (club is approx. 10mm). Open area is 36%. Available in 1.2mm mild steel | Self drilling screw. Used with the Gripspan slotted fixing clip (SLC65) for fixing Slotted (SL) or Slotted Dimpled (SLD) Gripspan planks down to metal supports | Webforge Locker H09564 is an attractive perforated metal sheet with 9.5mm hexagons on 60-degree centres. Open area is 64%. Available in 1.2mm mild steel | Webforge Locker R06440 is a general purpose, perforated metal sheet with 6.4mm round holes in a staggered pattern. Open area is 40%. Available in a choice of materials and thicknesses | Gripspan planks are the superior choice for walkways and platforms. They are lightweight, with exceptional spanning capability, whilst also being non-slip. They also pass the 15mm ball test set under AS1657 making them the ideal choice for overhead use. These planks are 6m long, galvanised and available in a variety of weights and profiles to suit the requirements of your project. | Webforge Locker 0910A is a general purpose expanded Aluminium sheet with mesh openings of approximately 22 x 7mm and a total open area in the range 75-89%. | Webforge Locker JE1112 is a heavy duty expanded metal mesh sheet with small openings, commonly used for security fences and screens. Anti-climb, available in a variety of orientations and finishes. | Webforge Locker R09540 is a general purpose, perforated metal sheet with 9.5mm round holes in a staggered pattern. Open area is 40%. Available in a choice of materials and thicknesses. |
Material | Galvanised Steel, Stainless Steel 304, Stainless Steel 316 | Aluminium, Aluminium (flattened), Galvanised Steel, Mild Steel, Mild Steel (flattened) | Aluminium | Mild Steel | Galvanised Steel | Mild Steel | Aluminium, Galvanised Steel, Mild Steel, Stainless Steel 304 | Galvanised Steel | Aluminium | Hot Dip Galvanised, Mild Steel | Aluminium, Galvanised Steel, Mild Steel, Stainless Steel 304 |