Content | Webforge Locker 5030 is a general purpose expanded metal sheet with mesh openings of approximately 83 x 41mm and a total open area in the range 76-83%. Available in a variety of materials. | Stainless Steel bolt and nut, suitable for use with the C100SM and C129SM top clips/C001SM AND C002SM clip sets | Webforge Locker R07962 is a general purpose, perforated metal sheet with 7.9mm round holes in a staggered pattern. Open area is 62%. Available in a choice of materials and thicknesses | Webforge Locker fine woven wire mesh with 0.9mm wire and 2mm openings. Due to current stock levels only available in Stainless Steel, material will be cut to the meterage ordered, price is per metre.
Max possible single length 30m. | Webforge Locker fine woven wire mesh with 0.7mm stainless steel (304) wire and 2.5mm openings. Material is 1525mm wide and will be cut to the meterage ordered, price is per metre.
Max possible single length 30m. | Webforge Locker fine woven wire mesh with 2mm wire and 10mm openings. Available in a 1220mm wide rolls of either galvanised steel or 304 stainless steel wire. Mesh is cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker 0910A is a general purpose expanded Aluminium sheet with mesh openings of approximately 22 x 7mm and a total open area in the range 75-89%. | Webforge Locker Gridwalk WK3022 is a heavy duty expanded metal walkway with mesh openings of 53 x 15mm. Sold in a plain mild steel or hot dip galvanised finish as well as a wide range of sizes.
For more product help, visit Ideas and Advice | Webforge Locker fine woven wire mesh with 0.13mm stainless steel (316) wire and 0.18mm openings. Material is 1220mm wide and cut to the meterage ordered, price is per metre. Max possible single length 30m, | Webforge Locker fine woven wire mesh with 0.16mm stainless steel (316) wire and 0.25mm openings. Material is 1220mm wide and cut to the meterage ordered, price is per metre.
Max possible single length 30m, | Webforge Locker fine woven wire mesh with 0.56mm wire and 1.6mm openings. Available in 304 stainless steel and galvanised steel. Material is cut to the meterage ordered; price is per metre.Max possible single length 30m. | Webforge Locker general purpose perforated metal sheet with 8mm round holes in a staggered pattern. Open area is 47%. Available in a choice of materials and thicknesses | Webforge Locker 1220 is a general purpose expanded metal sheet with mesh openings of approximately 22 x 9mm, with open areas in the range 64-71% (raised) and 62% (flattened). Available in a range of materials. | Splice Plate, To suit 65mm Gripspan leg, available in a galvanised or hot dip galvanised finish. Used to join continuous sections together in runs over clear spans; to enable planks to work as one continuous unit. Alternatively splice plates can be used to join sections over supports. Use HXB-10mm. | Webforge Locker R01623 is a general purpose perforated metal sheet with 1.6mm round holes in a staggered pattern. Open area is 23%. Available in 1.2mm mild steel | Webforge Locker L25440 is an attractive perforated metal sheet available in mild steel and aluminium, with 25mm slots in a staggered or stacked pattern. Slots run parallel to the long side of the sheet. Open areas are noted on individual variations. | Self drilling screw. Use with the Gripspan ADC diamond washer when fixing plain (PL) or serrated (SR) Gripspan sheets onto steelwork. |
Material | Hot Dip Galvanised, Mild Steel, Mild Steel (flattened) | Stainless Steel | Galvanised Steel, Mild Steel | Galvanised Steel, Stainless Steel 304 | Stainless Steel 304 | Galvanised Steel, Stainless Steel 304 | Aluminium | | Stainless Steel 316 | Stainless Steel 316 | Galvanised Steel, Stainless Steel 304 | Galvanised Steel, Mild Steel | Aluminium, Aluminium (flattened), Galvanised Steel, Mild Steel, Mild Steel (flattened) | | Mild Steel | Aluminium, Mild Steel | Zinc plated |