Content | Webforge Locker F325 is a walkway grating with centres of 60 x 50mm on loadbars and crossrods respectively. Available in untreated or hot dip galvanised mild steel with a plain or serrated surface. | Webforge Locker fine woven wire mesh with 0.56mm stainless steel (304) wire and 1mm openings. Material is cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker R07962 is a general purpose, perforated metal sheet with 7.9mm round holes in a staggered pattern. Open area is 62%. Available in a choice of materials and thicknesses | Fibre Reinforced plastic sheets with 25 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Webforge Locker C253 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an untreated or hot dip galvanised finish with a plain or serrated surface. | Webforge Locker L25440 is an attractive perforated metal sheet available in mild steel and aluminium, with 25mm slots in a staggered or stacked pattern. Slots run parallel to the long side of the sheet. Open areas are noted on individual variations. | Webforge Locker D325 is a walkway grating with spacings of 40 x 50mm c/c on loadbars and crossrods. Available in an untreated mild steel or a hot dip galvanised finish, with a plain surface. |