| Grating Bottom clip 316SS Mill Pattern A-F Remove | Grating M8 Mild Steel Galvanised, Thread Rolling Screw Remove | ||
|---|---|---|---|
| Image |  |  | |
| SKU | C200SM | C302MG | |
| Price | $3.93 ex GST | $1.24 ex GST | |
| Availability | 6646 in stock (Additional stock available interstate, typically 14 days.) | Additional stock available interstate, typically 14 days. | |
| Add to cart | |||
| Description | Mild Steel galvanised Hex head, thread rolling screw, suitable for use with C100MG (50 x 8mm), Pilot hole of 7.4mm required | ||
| Content | 316 Stainless Steel grating bottom clip, suitable for use with Aluminium and stainless steel grating on patterns A through to F, to be used in conjunction with C100SM (top clip), & C301SM (bolt and nut) | Mild Steel galvanised Hex head, thread rolling screw, suitable for use with C100MG (50 x 8mm), Pilot hole of 7.4mm required Installation Guide: 1. Place the grating in position. 2. Fit the C100MG clip to the grating and use it as a guide to pre-drill a 7.4mm pilot hole into the support structure. 3. Fit the screw C302MG into the top clip C100MG. 4. From the top of the grating using a hex head drive, drive the thread rolling screw into the pilot hole with a torque setting of 30Nm until it seats the top clip firmly against the grating and support steel. | |
| Weight | 0.076 kg | 0.05 kg | |
| Dimensions | N/A | N/A | |
| Angle | |||
| Colour | |||
| Drill | |||
| Hole Pitch (mm) | |||
| Hole Shape | |||
| Hole Size (mm) | |||
| Kickplate Orientation & Height | |||
| Material | Stainless Steel | Mild Steel | |
| Material Finish | Hot Dip Galvanised | ||
| LWO (mm) | |||
| SWO (mm) | |||
| Wire Diameter (mm) | |||
| Mesh Aperture (mm) | |||
| Material Thickness (mm) | |||
| Overall height (mm) |
Shopping Cart