Content | Webforge Locker Gridwalk, WK4514 is expanded metal walkway with mesh openings of 96 x 32mm. A range of sheet sizes available, and your choice of plain mild steel or hot dip galvanised
For more product help, visit Ideas and Advice | Webforge Locker R03341 is a general purpose perforated metal sheet, in mild steel with 3.25mm round holes in a staggered pattern. Open area is 41%. | Webforge Locker fine woven wire mesh with 0.7mm stainless steel (304) wire and 2.5mm openings. Material is 1525mm wide and will be cut to the meterage ordered, price is per metre.
Max possible single length 30m. | Platform angle stanchions in mild steel, available in an untreated or hot dip galvanised finish, as well as a range of angles to suit the specifications of your job (Stanchions are manufactured with a tolerance of +/- 1 degree, as a result for instance a 36 degree stanchion can be utilised on a 36,35 or 37 degree incline). | Webforge Locker 1930 is a general purpose expanded metal sheet with mesh openings of approximately 37 x 16mm and a total open area in the range 66-74% (raised) and 66% (flattened)
Available in a variety of materials & profiles. | Webforge Locker fine woven wire mesh with 0.56mm stainless steel (304) wire and 1mm openings. Material is cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker L25440 is an attractive perforated metal sheet available in mild steel and aluminium, with 25mm slots in a staggered or stacked pattern. Slots run parallel to the long side of the sheet. Open areas are noted on individual variations. | High Tensile woven wire from Webforge Locker. Made from 4.0mm high tensile steel with 10mm aperture. Available in flat sheets only. | Webforge Locker general purpose perforated aluminium sheet with 8mm square holes in straight rows. Open area is 53%. | Fibre Reinforced plastic sheets with 25 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Webforge Locker 0916 is a general-purpose expanded metal sheet with mesh openings of approximately 19 x 5mm and a total open area in the range 48-56% (raised) and 53% (flattened). Available in a variety of materials | Webforge Locker R12749 is a general purpose, perforated metal sheet with 12.7mm round holes in a staggered pattern. Open area is 49%. Available in a choice of materials and thicknesses | Fibre Reinforced plastic sheets with 38 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. |