Content | Webforge Locker fine woven wire mesh with 1.6mm wire and 5mm openings. Material is available in 1220mm and 1525mm widths, cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker fine woven wire mesh with 0.9mm wire and 2mm openings. Due to current stock levels only available in Stainless Steel, material will be cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker F325 is a walkway grating with centres of 60 x 50mm on loadbars and crossrods respectively. Available in untreated or hot dip galvanised mild steel with a plain or serrated surface. | Webforge Locker fine woven wire mesh with 0.56mm stainless steel (304) wire and 1mm openings. Material is cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker R07962 is a general purpose, perforated metal sheet with 7.9mm round holes in a staggered pattern. Open area is 62%. Available in a choice of materials and thicknesses | Fibre Reinforced plastic sheets with 25 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Webforge Locker C253 is a walkway grating with spacings of 40 x 100mm c/c on loadbars and crossrods. Available in an untreated or hot dip galvanised finish with a plain or serrated surface. | Webforge Locker L25440 is an attractive perforated metal sheet available in mild steel and aluminium, with 25mm slots in a staggered or stacked pattern. Slots run parallel to the long side of the sheet. Open areas are noted on individual variations. | Webforge Locker D325 is a walkway grating with spacings of 40 x 50mm c/c on loadbars and crossrods. Available in an untreated mild steel or a hot dip galvanised finish, with a plain surface. |