Content | Webforge Locker 356 is a fine grade aluminium expanded metal sheet with a total open area in the range 70-80% | Webforge Locker fine woven wire mesh with 0.7mm stainless steel (304 & 316) wire and 1.4mm openings. Material is cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker fine woven wire mesh with 2mm wire and 6.4mm square openings. Mesh is available in a variety of widths and materials, it will be cut to the meterage ordered, price is per metre.Max possible single length 30m. | Webforge Locker 0708 is a general purpose expanded metal sheet with mesh openings of approximately 14 x 5mm and a total open area in the range 75-80%. | Gripspan planks are the superior choice for walkways and platforms. Lightweight, exceptional spanning, non slip. Passes the 15mm ball test in AS1657 for overhead use.
| Webforge Locker R06451 is a general purpose, perforated metal sheet with 6.4mm round holes in a staggered pattern. Open area is 51%. Available in a choice of materials | Webforge Locker 203 is a fine grade mild steel expanded metal sheet with mesh openings of approximately 7 x 4.5mm and a total open area in the range 66-71%, available in a range of sizes. | Fibre Reinforced plastic sheets with 38 x 6mm loadbars, at 38 x 38mm centres. Available in Vinyl Ester or Isopthalic Polester Resin. The sheets are rendered anti-skid by a coarse grit that is embedded into the top surface, sheets are available in range of colours to suit the needs of your project. | Fibre Reinforced plastic grating sheet in Isopthalic Polyester Resin, with 38 x 6mm loadbars, complete with an overlay that results 12 x 12mm surface apertures. The sheet is rendered anti-skid by coarse grit that is embedded into the top surface, sheets are available in grey. | Webforge Locker R09551 is a general purpose, perforated metal sheet with 9.5mm round holes in a staggered pattern. Open area is 51%. Available in a choice of materials and thicknesses | Galvanised End/Carrier plates, are available in 225 & 300mm. These can be used to bolt planks end to end by welding onto the ends of planks and bolting with M10 x 20mm bolts, or as part of fabricated stair tread assemblies. | Webforge Locker R01636 is a general purpose perforated metal sheet with 1.6mm round holes in a staggered pattern. Open area is 36%. | High Tensile woven wire from Webforge Locker. Made from 6.3mm high tensile steel with 25mm aperture. 1580mm x 1260mm flat sheets |
Material | Aluminium | Stainless Steel 304, Stainless Steel 316 | Galvanised Steel, Stainless Steel 304 | Mild Steel | Galvanised Steel | Aluminium, Galvanised Steel, Mild Steel, Stainless Steel 304 | Mild Steel | FRP | FRP | Aluminium, Galvanised Steel, Mild Steel | | Mild Steel, Stainless Steel 304 | High Tensile Steel |