Content | Webforge Locker R04851 is a general purpose, perforated metal sheet with 4.8mm round holes in a staggered pattern. Open area is 51%. Available in a choice of materials and thicknesses | Webforge Locker R07962 is a general purpose, perforated metal sheet with 7.9mm round holes in a staggered pattern. Open area is 62%. Available in a choice of materials and thicknesses | Webforge Locker fine woven wire mesh with 0.9mm stainless steel (304) wire and 3.15mm openings. Material is 1550mm wide and cut to the meterage ordered, price is per metre.Max possible single length 30m. | Side Offset Angle Left stanchion in mild steel, available in an untreated mild steel and hot dip galvanised finish, as well as to a variety of angles, (Stanchions are manufactured with a tolerance of +/- 1 degree, as a result a 42 degree stanchion can be utilised on a 41 or 43 degree incline). | Webforge Locker L25440 is an attractive perforated metal sheet available in mild steel and aluminium, with 25mm slots in a staggered or stacked pattern. Slots run parallel to the long side of the sheet. Open areas are noted on individual variations. | Webforge Locker R06451 is a general purpose, perforated metal sheet with 6.4mm round holes in a staggered pattern. Open area is 51%. Available in a choice of materials | Webforge Locker 1216 is a general purpose expanded metal sheet with mesh openings of approximately 23 x 9mm and a total open area in the range 67-75% (raised) and 63% (flattened). Available in a choice of materials. |
Material | Aluminium, Galvanised Steel, Mild Steel, Stainless Steel 304, Stainless Steel 316, Zinc Alume | Galvanised Steel, Mild Steel | Stainless Steel 304 | Mild Steel | Aluminium, Mild Steel | Aluminium, Galvanised Steel, Mild Steel, Stainless Steel 304 | Aluminium (flattened), Galvanised Steel, Galvanised Steel (Flattened), Mild Steel, Mild Steel (flattened) |