Content | Side Offset Angle Left stanchion in mild steel, available in an untreated mild steel and hot dip galvanised finish, as well as to a variety of angles, (Stanchions are manufactured with a tolerance of +/- 1 degree, as a result a 42 degree stanchion can be utilised on a 41 or 43 degree incline). | Webforge Locker L25440 is an attractive perforated metal sheet available in mild steel and aluminium, with 25mm slots in a staggered or stacked pattern. Slots run parallel to the long side of the sheet. Open areas are noted on individual variations. | Webforge Locker R06451 is a general purpose, perforated metal sheet with 6.4mm round holes in a staggered pattern. Open area is 51%. Available in a choice of materials | Webforge Locker 1216 is a general purpose expanded metal sheet with mesh openings of approximately 23 x 9mm and a total open area in the range 67-75% (raised) and 63% (flattened). Available in a choice of materials. |
Material | Mild Steel | Aluminium, Mild Steel | Aluminium, Galvanised Steel, Mild Steel, Stainless Steel 304 | Aluminium (flattened), Galvanised Steel, Galvanised Steel (Flattened), Mild Steel, Mild Steel (flattened) |